Rocker C pics..Work in progress
Thread Starter
|
Road Captain
Joined: Apr 2005
Posts: 528
Likes: 0
RE: Rocker C pics..Work in progress
the sprocket bolt covers are a Harley part. Just look up softail and it is the standard size.
On the other covers, they are most likely Hot Toppers that I have had left over from other bikes. I tried a bunch on some of the more exposed bolts, and actually found a few that would it.
Good luck.
On the other covers, they are most likely Hot Toppers that I have had left over from other bikes. I tried a bunch on some of the more exposed bolts, and actually found a few that would it.
Good luck.
Seasoned HDF Member
Joined: Dec 2004
Posts: 11,068
Likes: 1,473
From: Texas! Ya mean there's someplace else?
RE: Rocker C pics..Work in progress
Like to see one with a barely padded seat made up on the middle pan in this pic:
[IMG]local://upfiles/670/983D372EFF4B49228F346F7AE61A11C2.jpg[/IMG]
[IMG]local://upfiles/670/983D372EFF4B49228F346F7AE61A11C2.jpg[/IMG]
Thread Starter
|
Road Captain
Joined: Apr 2005
Posts: 528
Likes: 0
RE: Rocker C pics..Work in progress
A lot of the Rocker owners, especially the "C" owners, are looking for a seat that will emit a lower profile. The trick is that the rear swingarm has about 3" on travel, so that present somewhat of a problem for something too low as the seat will not move in unison with the rear swingarm. I'm sure some mfg. will come up with a clever idea on how to exhibit a lower profile with the seat, but still maintain the required clearance for the rear swingarm to absorb the bumps.
Thread
Thread Starter
Forum
Replies
Last Post
vegashd
Touring Models
27
Jan 6, 2007 07:52 PM
