200 conversion
Road Captain
Joined: Nov 2007
Posts: 628
Likes: 0
From: Texas
Im actually wanting to put an 06 swingarm on an 07. Its a 240 rear swingarm for an 06. RC components has the wide tire kit that has the single pipe swingarm instead of the V shaped one. They only make the kits for up to 06 since 07+ has the 6 speed tranny. Im hoping to just buy the 240 swingarm from them and then get the tranny offset kit from heartland or somebody else. So the long winded question here is would that 06 240 swing arm bolt on to an 07 frame?
Advanced
Joined: Jan 2008
Posts: 95
Likes: 0
From: new england, worcester county, mass
i am currently workin on putting a 200 on my 02 standard myself. i bought an 18x5.5 wheel laced with new style softail hub so i supposedly wont have to mess with my brakes but i did buy an 06 fxst sprocket (skinny one) cus i'm told thats what you need to go up to 200. i also bought an 06 fxst fender and am trying to find a good deal on some 06 struts. im told you can use those factory struts if you drill and tap one of the holes on the frame. if thats not something you want to do there is are "custom struts" available but they want $895 for them which i think is a rip. i wanna get my bike on the lift this week and see how the wheel fits.. i'll try to post some results/pics...
Road Master
Joined: Aug 2008
Posts: 816
Likes: 10
From: Southern, MD
Hey are those for a 9" wide fender? Do they have internal mount holes? How much?
Advanced
Joined: Dec 2008
Posts: 80
Likes: 0
I can't help ya yet. But I'm in the same boat as you. I have a 2000 Night Train. I already bought a rear fender and fender struts from an '07 Night Train, And a 17x6 wheel. I just bought a swingarm from a '08 Night Train. I'm waiting on it to come in.
Please keep me updated if you find any more info that will help and I'll do the same.
Thanks,
Robert
Please keep me updated if you find any more info that will help and I'll do the same.
Thanks,
Robert
Tourer
Joined: Oct 2006
Posts: 342
Likes: 1
From: Houston(by way of Kaplan, LA)
Chrome-dome-dave,
they were made for me, to fit a 240/250 set up..just went back and looked..seems i made a mistake and thought josh was mocking up a 240
they were made for me, to fit a 240/250 set up..just went back and looked..seems i made a mistake and thought josh was mocking up a 240
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
The Best and Worst Harley-Davidson Moves of 2025
Verdad Gallardo
Road Captain
Joined: Sep 2007
Posts: 578
Likes: 1
From: Many, Louisiana
Bigbluefatboy,
I screwed up. I double checked and it's an '07 swingarm. I think that the rim I got is from a '06. It's for a 3/4" axle. But I think I could just swap the bearings out for the 1" axle if need be. Now I need to find out for sure about the size pulley and belt I need. And about the brake rotor and stuff.
Thanks,
Robert
I screwed up. I double checked and it's an '07 swingarm. I think that the rim I got is from a '06. It's for a 3/4" axle. But I think I could just swap the bearings out for the 1" axle if need be. Now I need to find out for sure about the size pulley and belt I need. And about the brake rotor and stuff.
Thanks,
Robert
Last edited by vulcanater; Dec 15, 2008 at 07:44 PM.
