Gerardjohn, pics of your set up would be appreciated.

Brent

 

I would try to avoid mounting it behind the mudguard. I had mine there for awhile. It gets pretty dirty and got banged around due to the swing arm motion. I moved it to the deeper tray under the seat.
MikeM

 

Any one with an 05 or earlier bike with a PC, i would love to see some pics of the ecm tray and possibly if anyone has pics with the tray removed that would be great.

Thanks

Brent

 

Well I pulled the Trigger and cut out my fender for the ECM Tray, Turned out Good, a ton more room now, I just test fit it and made a few brackets, as the tray is for an 05. Got to thow some paint on brakests and some touch up on the bre metal from where i cut. I highly recomment this mod if your not scared to alter your bike. There is plenty of room now and even with the parts just layinf in there the seat sill goes on easily. here are some quick pics.







Brent

 

can the original cable plug back into the ECM? I only ask because if you ever had to go with another system or the power commander acts up on the road you need to be able to remove it and go stock just to get home.

 

The original plug will still plug in. The ecm is pretty much in the same spot just recess about 1 in into the fender.

 

I thought the PCV was for 2009 and newer bikes?

 

Fuel Moto will retro fit of some 08 and 07 models, Dynojet approves modifacation, it is only a software thing and dyno jet doesnt want to bother but approved fuel moto.

Brent

 

I asked fuel moto what they do, was it hardware or software they never got back to me....

 

Give jamie at fuel moto a call, he is great to deal with and very knowledabel. They got right back to all my emails.

Brent