Power Commander V
Thread Starter
|
Cruiser
Joined: Jun 2006
Posts: 142
Likes: 0
From:
Jamie,
I did find leaks at my muffler clamps. I tried to tighten the clamps but they failed, they are the cheap clamps that looks like hose clamps. I will have to replace them and try to adjust my PCV to what you recommended.
I did find leaks at my muffler clamps. I tried to tighten the clamps but they failed, they are the cheap clamps that looks like hose clamps. I will have to replace them and try to adjust my PCV to what you recommended.
Advanced
Joined: Jan 2009
Posts: 76
Likes: 1
From: Around the crack
Just installed VH Big Radius 2-2, SE Heavy Breather and PC5 programmed by Fuel Moto on my 09 Heritage. So far all is great.. seems like I'm getting some more power and no pops on deceleration. Also it looks sweet and its much louder. I'm going to have to talk to FuelMoto about that 
Last edited by kavika420; Apr 29, 2009 at 09:55 PM.
Road Warrior
Joined: Nov 2007
Posts: 1,315
Likes: 51
From: Cincinnati
I put a PC-V on about three weeks ago and have been very happy. I too had decel pops, but I checked (with a fog machine) for leaks and found none. After talking to Jamie we increased the fuel at the closed throttle position. Worked like a champ. Don't freakout if you have to go over 10. I have talked to others and some are sitting at 20 at the zero position and have had no problems.
Thread
Thread Starter
Forum
Replies
Last Post
