Dealers Differ

Reply Subscribe

Thread Tools

Search this Thread

Jun 20, 2009 | 06:58 AM

#11

tk353

Ultimate HDF Member

Joined: Oct 2007

Posts: 5,257

Likes: 6

From: Leander Texas

Quote:

Originally Posted by smitbrad

I installed Rush 2" and did nothing else for about 1000 miles...had no problems.
Later I decided I wanted highflo AC which then required me to install a fuel mgmt system and I had it dyno.

ditto on this but i would do 1.75 baffles and you should have a better ride

Jun 20, 2009 | 07:34 AM

#12

Z06_Pilot

Tourer

Joined: May 2008

Posts: 330

Likes: 0

From: Columbus, OH

so I'll pile on as well.

My wife and i each put slip-on's on our rides before we went whole hog. no ECM recal. needed in either case. they ran absolutely perfect..

Jun 20, 2009 | 07:37 AM

#13

smitbrad

Tourer

Joined: Jan 2007

Posts: 271

Likes: 0

From: Easton, PA

Quote:

Originally Posted by tk353

ditto on this but i would do 1.75 baffles and you should have a better ride

I agree with going with the 1.75 baffles. The 2" are starting to get a little loud for me. I re-wrapped the baffles which has helped but they are still a little loud when cruising on the highway. I'm at the stage where I would sooner have the bike a little quieter....gee am i getting old or what!

Jun 22, 2009 | 02:10 PM

#14

jnh56

Thread Starter

1st Gear

Joined: Jun 2009

Posts: 5

Likes: 0

Thanks for all the input everyone.

Jun 22, 2009 | 04:51 PM

#15

IronAss

Seasoned HDF Member

Joined: Apr 2008

Posts: 23,053

Likes: 12,327

From: Arkansas

After talking to a couple of dealers about small things and then reading story's here about dealer issues I have come to the conclusion that the dealerships won't pay for knowledgeable people to work in them and you for the most part...can't believe half of what they tell you.

I suggest you ask around and find a good local Independent wrench and start using him/her for your Scooter's well being.