Need help !! Drag Bars/NT

Reply Subscribe

Thread Tools

Search this Thread

Jul 18, 2009 | 05:31 AM

#11

mulch63

Thread Starter

Road Master

Joined: Feb 2007

Posts: 849

Likes: 2

From: where i'm at

Quote:

Originally Posted by rdoucet

I sent you a PM.

I have a set of Carlini pullback bars set up for internal wiring that I took off my night train that you can try out and see if your wife likes.

Sent ya PM.......

Jul 18, 2009 | 09:04 AM

#12

Archer1968

Tourer

Joined: Aug 2007

Posts: 443

Likes: 7

From: Las Vegas NV

Have you tried Flanders Handle Bars, i got a set of internal wired drags for my 07 FXST and i use the 6.5" pullbacks. Not bad pricing and good quality, plus there is a lot of selections.
http://www.flandershandlebars.com/

Jul 19, 2009 | 01:07 AM

#13

QS78

Tourer

Joined: Nov 2008

Posts: 472

Likes: 0

Quote:

Originally Posted by Joe What

to determine what your pull back is. draw an imaginery line across the handle bars from the edge of the grip to the other and then measure the distance from that line to the center of the riser at the mounting point (tripple trees).. That will give you your pull back.. I hope I explained it right...

this what confuses me too. what u explained is the pullback on the handlebar. But how to count the riser pullback ??

Jul 19, 2009 | 01:10 AM

#14

QS78

Tourer

Joined: Nov 2008

Posts: 472

Likes: 0

stock pullback is 4.5"

Last edited by QS78; Jul 19, 2009 at 09:17 AM.

Jul 19, 2009 | 06:03 PM

#15

mulch63

Thread Starter

Road Master

Joined: Feb 2007

Posts: 849

Likes: 2

From: where i'm at

Quote:

Originally Posted by QS78

stock pullback is 4.5"

This is about what I came up with. I wanted to know what the factory spec says overall pullback is. THAT way I came make a smat choice in mail ordering wifey's bars. Example: If stock overall is 4.5 and bars on-line say 6 well thats about what I need .....

jim