Gasket fitment???

Reply Subscribe

Thread Tools

Search this Thread

Jan 17, 2010 | 01:40 PM

1 Beat Up HOG

Thread Starter

Advanced

Joined: Oct 2007

Posts: 54

Likes: 0

From:

Gasket fitment???

I'm putting the top end from a 2006 duece onto a 2003 heritage. will all the gaskets in a complete overhaul gasket kit fit?

cause i looked on ebay and there is one that says 99-04 so i'm a little lost on this one.

http://cgi.ebay.com/ebaymotors/ws/eB...tchlink:top:en

thanks guys!

Jan 17, 2010 | 06:29 PM

1 Beat Up HOG

Thread Starter

Advanced

Joined: Oct 2007

Posts: 54

Likes: 0

From:

maybe i should of said. what gasket kit can i use?

Jan 17, 2010 | 09:21 PM

snip0721

Road Master

Joined: Jan 2007

Posts: 861

Likes: 3

From: trivoli illinois

the one you linked to will work fine. most gasket kits will give you some gaskets that you will not use, it should contain gaskets for both carb and fuel injection models . all the other gaskets will be the same. at least that is how the cometic kits work. steve

Jan 17, 2010 | 09:46 PM

snip0721

Road Master

Joined: Jan 2007

Posts: 861

Likes: 3

From: trivoli illinois

you doing a 88" or 95"? steve

Jan 19, 2010 | 05:30 PM

1 Beat Up HOG

Thread Starter

Advanced

Joined: Oct 2007

Posts: 54

Likes: 0

From:

its a 88 as far as i know.

Jan 19, 2010 | 06:21 PM

snip0721

Road Master

Joined: Jan 2007

Posts: 861

Likes: 3

From: trivoli illinois

i looked at the link you posted. not sure if its a gasket set for a 88" or 95". the only difference is the head gasket. check the bore on the cylinders your gonna use.
3.750=88"
3.875=95"