When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
More fuel needs to be added at idle and low throttle, just go a little at a time till its gone. I have the same tuner and thats all thats needed. If the bike was tuned just don't mess with any other tables
+1 and I agree. IF you have no exhaust leaks then you need a little fuel added at the 0% throttle position. Mine popped like crazy until I fine tuned the 0% throttle position on both cylinders via my PCIII. Like the man said, I went a little at a time, buttoned up the bike,,, took it for a ride,,if it still popped, back to the garage, seat off, computer hooked up..added a little more fuel to the 0% throttle position. Trial and error...and like he also said,,LEAVE THE OTHER TABLES ALONE. Now my bike just gurgles a little bit.
Good luck and ride safe.
+1 and I agree. IF you have no exhaust leaks then you need a little fuel added at the 0% throttle position. Mine popped like crazy until I fine tuned the 0% throttle position on both cylinders via my PCIII. Like the man said, I went a little at a time, buttoned up the bike,,, took it for a ride,,if it still popped, back to the garage, seat off, computer hooked up..added a little more fuel to the 0% throttle position. Trial and error...and like he also said,,LEAVE THE OTHER TABLES ALONE. Now my bike just gurgles a little bit.
Good luck and ride safe.
Yes, you can enrichen the low end. BUT... your performance won't be maximum according to my tuner (who is excellent in my opinion) because he stated that he couldn't get all of the decel popping out, that it would be ok, and that my PCIII does not tune finely enough to keep your performance up but your popping out. (I.O.W. it doesn't dynamically adjust AFR at any rpm, just for a range of rpm, and it doesn't really understand 1800 rpm but 0 throttle position).
The zero throttle position comment is right on. If you have taken your throttle cables apart for maintenance lubing and then adjusted them according to the shop manual, you also have to reset your 0 throttle position.
However, I have not worked with SE Tuners at all... but I'm willing to get, at their price, that they are similar to the PC's and not as sophisticated as the Thunder Maxs, etc.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.