09 Rocker C errror code displayed with key on
Thread Starter
|
Tourer
Joined: Sep 2008
Posts: 302
Likes: 2
From: hobart, in.
09 Rocker C errror code displayed with key on
I'm having issues with my Rocker. I have a Thundermax ecm which up until recently has been great. Lately I get a check engine light when I first start the bike 'cold'. Code p0131 and p0151 lean o2's. After I ride the bike for a few, I can cycle the ignition and it goes away. The bike has ran fine until recently. I rode to work the other day and it was fine. Went to ride home and it would barely run, running unusually smooth and dying if i touched the throttle at all. Finally got it good enough to limp home. Went to check it out yesterday and when I turn on the ignition I get a : E 1 P displayed on my speedo! The e isn't a complete letter, the top horizontal line is missing. I can't find any info on this code that it's displaying. I'm still waiting for the diagnostic cables to show up from Zippers as the installing dealer screwed me; kept em(for future work) and now say they don't have them. Any help with this code would be appreciated as I already have my Sturgis trip booked and not a whole lot of time to fix this problem!
Thread Starter
|
Tourer
Joined: Sep 2008
Posts: 302
Likes: 2
From: hobart, in.
This was a bit of a brain fart. I traced the P codes to a bad autotune module. The E 1 P code was actually from me having the security module tucked out of the way and it was in tip mode.(sure as hell didn't look look like a "T" to me) Downloaded a new tuneup into the ecm and am running it in open loop till I get to Sturgis. Zippers already informed me that I can get it warrantied while I'm there as they will be set up at Black Hills Harley.
Thread
Thread Starter
Forum
Replies
Last Post
klwsparks
Ignition/Tuner/ECM/Fuel Injection
3
Mar 4, 2012 07:41 AM
