make your own bag stiffeners
Thread Starter
|
Tourer
Joined: Jul 2007
Posts: 403
Likes: 7
From: sanford nc
make your own bag stiffeners
for those of you who have made you own bag stiffeners what did you use and where did you get it.all the plastic signs i found are way to thin so that doesnt seem to be a way to do it.
Ultimate HDF Member
Joined: Feb 2008
Posts: 5,615
Likes: 9
From: Escondido, CA
I used a stiff plastic that I bought from a plastic supplier called MGM Plastics in San Marcos, CA. It's probably at least an eigth on an inch thick or more. I just cut it and stuffed it into the bags at the rear. I think I'm going to make some lid supports next. For $20 you can get a lot of plastic.
Ultimate HDF Member
Joined: May 2010
Posts: 7,882
Likes: 5
From: So California
A buddy is considering using something for his Heritage bags.
He wanting locks and I sugested these,
http://inertiawrx.com/index.html
A stiffener could be mounted under the support bracket.
He wanting locks and I sugested these,
http://inertiawrx.com/index.html
A stiffener could be mounted under the support bracket.
Thread
Thread Starter
Forum
Replies
Last Post
