When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
wow that is pretty low profile for a DOT. The helmet in my sig pic is my Voss. I can get a baseball cap or skull cap under it as well. Thanks story....the visor does come off of it right?
looks like it is off in the pic next to the Voss....
what kind of glasses you wearing in that pic? looks like we have similar tastes...lol
Last edited by brettnbama; Mar 12, 2011 at 07:40 AM.
Novelty on the left, Outlaw then THH DOT. I removed the visor and visor studs. Put the screws back in. The small holes could easily be filled with black silicone or gasket material. I'm lazy and the screws were right their. lol
Story your friend was right. The Outlaw is just slightly smaller then the THH. After a couple hours riding a pressure point was bugging me. Removed a little foam in one area and it is perfect.
I just piked up a carbon one on-line for $70.00, it's a great looking helmet. DOT rated and minimal in size appearance. A bonus is the internal retractable face sheild. It just covers the eyes and when down almost looks like sun glasses instead of a sheild.
My head measures 7 1/8" and normally I wear a size medium but this helmet fit perfectly in a size small. They seem to run a little large.
Brett yes the visor come off... for me I look better with the visor on (well that what the wife says) lol
Send my friend Neil a email... and see if he can hook you up he's in florida tell Mark form Hawaii told you to check him out... neil@contrabanddesigns.com tell him where you are and see if he can get you a good price.
Brett I think in that pic I'm wearing my Oakley monster pups
Yes it's the Outlaw Carbon Fiber... Model on the boxsay AX-30010... Like I mentioned earlier measure you head and if you fall in between sizes go UP... that worked for me.
Thanks for this great thread - pics tell the whole story. For those who may be looking at the 3/4, take the time to look at the Rockhard classic 3/4. I just picked one up in the classifieds here and this helmet is the chit! Very low-pro and very well-made. http://www.leatherup.com/p/Rockhard-...et/107559.html
Seems like leatherup is the way to go around here. Would love to see a few more pics of people wearing the outlaw helmets. Looks to me like 'm gonna be ordering a new lid. Been pressing my luck with the novelty helmet on base. Not to mention going down last summer. But I must say, my novelty helmet held up to the pavement pretty well.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.