How to Remove Front Fender
Thread Starter
|
Intermediate
Joined: May 2005
Posts: 37
Likes: 0
From: Arkansas
How to Remove Front Fender
The manual says I must first remove the front wheel on my '03 Heritage. Is that really necessary? Can't I just remove the two bolts on both sides, disconnect the fender light, then slide the fender out?
Any help or advice would be appreciated. TIA...............
Any help or advice would be appreciated. TIA...............
Tourer
Joined: Mar 2005
Posts: 331
Likes: 0
From:
RE: How to Remove Front Fender
Its really hard to get out without taking the wheel off if you can even do it. Do yourself a favor and remove the wheel. My Deluxe fender flares out in the back (Heritage is probably the same) and it won't slide out from the front. It probably would slide out from the rear but the frame gets in the way.
Seasoned HDF Member
Joined: Dec 2004
Posts: 7,934
Likes: 43
From: Bloomfield, NM
RE: How to Remove Front Fender
If it's like a dresser, there are tabs that bend down and lock the bolts that hold the fender. You have to remove the wheel to get these tabs bent up so the bolts will turn.
Regards,
Bill
Regards,
Bill
Banned
Joined: Jun 2005
Posts: 6,982
Likes: 1
From: Polygamy Plains, Utah
RE: How to Remove Front Fender
From my experience, short cuts ALWAYS cost more in the end when dealing with an H-D. I have an 03 Heritage. I removed the wheel. Yes, it's a bit more work, but it's worth the effort.
Thread
Thread Starter
Forum
Replies
Last Post
