race fueler and error code
Thread Starter
|
Intermediate
Joined: Oct 2010
Posts: 47
Likes: 0
From: Brazil
race fueler and error code
Hi,
I had a se race fueler installed by dealer in my 2007 softail standard and I felt that the bike was running like a crap.
After installed the se exhaust wrap the bike gets worst, popping on desacelerations, flat spots during acelerations and a hotter engine temperature.
I checked for a error codes stored in the dash and I found the following codes : p0131, P0132, P0151 and P0152.
With these simptons I found that I was runnig with a lean mixture and I adjust the race fueler for a richer mixture in low, medium and high rpms. After that the bike is runnig a lot of better but I´m still getting the P0152 code.
What do you think about? How can I solve this problem? I don´t think that the O2 sensor is bad. Is there any problem riding with this code?
Thanks
Mauricio
I had a se race fueler installed by dealer in my 2007 softail standard and I felt that the bike was running like a crap.
After installed the se exhaust wrap the bike gets worst, popping on desacelerations, flat spots during acelerations and a hotter engine temperature.
I checked for a error codes stored in the dash and I found the following codes : p0131, P0132, P0151 and P0152.
With these simptons I found that I was runnig with a lean mixture and I adjust the race fueler for a richer mixture in low, medium and high rpms. After that the bike is runnig a lot of better but I´m still getting the P0152 code.
What do you think about? How can I solve this problem? I don´t think that the O2 sensor is bad. Is there any problem riding with this code?
Thanks
Mauricio
Last edited by Serafim; Sep 9, 2011 at 10:16 AM.
Thread
Thread Starter
Forum
Replies
Last Post
louthestar
Ignition/Tuner/ECM/Fuel Injection
2
Aug 22, 2011 11:29 AM
