Tail light wiring question
Thread Starter
|
Road Master
Joined: Jul 2007
Posts: 863
Likes: 1
From: Dover, DE
Tail light wiring question
I just done...well almost done with my project and the only concern I had was the clearance of the wire keeps i used. They are 3/8" diameter (fuel line straps with a 5/16" bolt hole). what Ineed is to have some thing thinner with a 5/6" bolt hole or something that 2 18 guage wires would fit inside and attach with double sided take to the inside of the fender...looking for some ideas from the great minds of the forum.
I've attached some pictures of what I'm currently using to give you an idea.
Any help is mucho appreciated
I've attached some pictures of what I'm currently using to give you an idea.
Any help is mucho appreciated
Thread Starter
|
Road Master
Joined: Jul 2007
Posts: 863
Likes: 1
From: Dover, DE
It fits 3/8" is to wide and I can't find anything in a smaller diameter that will use 5/16 bolt (strut bolts are 5/16"). I'm looking for something narrow maybe using double faced tape...been looking online and have found a few things that may work but the description was very vague.
Cruiser
Joined: Oct 2010
Posts: 220
Likes: 1
From: Edmonton Alberta, Canada
The baggers use a rubber sleeve that has double sided tape for mounting to the fender inside. If this helps.
Try the depot or lowes, electrical section. They have flat zip tie anchors with double stick tape. They are about 1" x 1". You might need to trim it down, or heat it and mold to shape of the mounting point. But you stick it on, thread a zip tie through it, and strap in whatever wires you've got.
Might be lower profile, or you can put it wherever it is out of the way. Just make sure to clean attachment point well.
Might be lower profile, or you can put it wherever it is out of the way. Just make sure to clean attachment point well.
Road Warrior
Joined: Sep 2005
Posts: 1,506
Likes: 0
From: AZ
Trending Topics
Use a wire clip under the strut bolt,heat shrink it first.got them at home depot,in the nuts and bolts section ,hugs the fender close,fits like a washer.OR USE THE 3M DOUBLE STICK HANGERS,I USED THEM UNDER MY TANK TO RUN LED WIRES,BUT FOR WEATHER ID USE THE WIRE CLIPS
Last edited by RICHIEMACK; Feb 6, 2012 at 04:16 AM.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
Jason Momoa Is Turning Classic Harleys Into PHEVs
Verdad Gallardo
Harley-Davidson Fat Boy Becomes a Dark, Decepticon-Inspired Custom
Verdad Gallardo
6 Weirdest Harley-Davidsons Ever Sold to the Public
Verdad Gallardo
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
