When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I bought the one wit the center filler cap. Need the one with the side filler cap. Also the harley battery would not fit in the battery box on the back of the tank. It was only about an 1/8" difference, but it wouldnt fit.
I guess if I go the one with the side fill cap and the battery box was the proper size, it would work. I screwed up from the start and ket geting worse!!
They make a smaller battery, that should fit. Some crossbones guys have used them, when they relocate the ECM under the seat. Awesome, bike, by the way!
Thanx for the info on the battery. I may take the grinder to that round oil tank I bought and cut off the back of the battery box and just enlarge it the small amount I need. Then weld a side filler nozzle on there. We will see what the winter brings.
Now ya got me thinkin about the dam round oil tank again!!! Hahaha
That's because the round oil tank looks bad ***. It's your monster, but I would go with the round. Just an opinion.and hell, you've gone this far with customization, what's another item? Plus, you already have it, and it may be to cold or wet to ride.
I know I'm struggling, big time. I just finished putting a heritage springer back together, after buying it in parts, and I'm ready to ride, but the weather says no. So, I read this thread yesterday, and half way through, I could feel your pain, when you were dying to ride, in the ice and snow, and your good conscience wouldn't let you do something that crazy. Sucks, though. Lol.
Thanx for the info on the battery. I may take the grinder to that round oil tank I bought and cut off the back of the battery box and just enlarge it the small amount I need. Then weld a side filler nozzle on there. We will see what the winter brings.
Now ya got me thinkin about the dam round oil tank again!!! Hahaha
cool video, loud *** bike, your neighbors must be thrilled, lol
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.