Sportster Models 883, 883 Custom, 1200 Custom, 883L, 1200L, 1200S, 1200 Roadster, XR1200, and the Nightster.
Sponsored by:
Sponsored by:

more problems

Thread Tools
 
Search this Thread
 
Old Mar 10, 2020 | 02:53 PM
  #1  
gerald martin's Avatar
gerald martin
Thread Starter
|
Road Warrior
10 Year Member
Photogenic
Liked
Top Answer: 1
Joined: Nov 2015
Posts: 1,273
Likes: 464
From: anywhere
Default more problems

Hi
I now have more problems with my 2015 sportster 883 with 1200 conversion kit. Just driving along. bike just shuts off. Look for codes none. Hit the start button and it starts and runs fine. Took battery out went to battery shop they tested it all was good load test good cranking power and fully charged. When i took the battery out every thing was tight, checked the ground cable and the power cable every thing good. I just had a direct link tuner put on. When i first put it on it stalled and I got 3 codes Po132 front sensor rich, Po152 rear sensor rich and PO507 could not find that one. Took it back to tuner, he adjusted things and said it was good to go. road it for 200 miles and it stalled again but no codes this time Any ideas what the problem is?
 
Reply
Old Mar 10, 2020 | 03:07 PM
  #2  
Bass Player's Avatar
Bass Player
Grand HDF Member
5 Year Member
Liked
Loved
Top Answer: 1
Joined: Aug 2018
Posts: 4,121
Likes: 2,114
From: W. MI.
Default

Tuner...wrong setup or possibly defective. Plug n play? Could be the hookup itself either way?
 
Reply
Old Mar 10, 2020 | 05:17 PM
  #3  
handirifle's Avatar
handirifle
Seasoned HDF Member
Veteran: Army
Shutterbug
Liked
Top Answer: 1
Joined: Sep 2018
Posts: 6,024
Likes: 1,782
From: Kalifornia
Default

Remove the tuner and road test the bike. Might run lean but if it does not shut off then its the tuner. I would ask for replacement or money back.
 

Last edited by handirifle; Mar 10, 2020 at 05:19 PM.
Reply
Old Mar 12, 2020 | 06:33 AM
  #4  
grbrown's Avatar
grbrown
Club Member
15 Year Member
Liked
Loved
Community Favorite
Joined: Jun 2007
Posts: 45,429
Likes: 2,896
From: Bedford UK
Lightbulb

Originally Posted by gerald martin
Hi
I now have more problems with my 2015 sportster 883 with 1200 conversion kit. Just driving along. bike just shuts off. Look for codes none. Hit the start button and it starts and runs fine. Took battery out went to battery shop they tested it all was good load test good cranking power and fully charged. When i took the battery out every thing was tight, checked the ground cable and the power cable every thing good. I just had a direct link tuner put on. When i first put it on it stalled and I got 3 codes Po132 front sensor rich, Po152 rear sensor rich and PO507 could not find that one. Took it back to tuner, he adjusted things and said it was good to go. road it for 200 miles and it stalled again but no codes this time Any ideas what the problem is?
Visit your tuner again! He can put his hands on your bike and check it over. Did he supply and fit the 1200 kit?
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
David Butler
Sportster Models
3
Aug 8, 2019 09:52 AM
David Jeremy Dickson
General Topics/Tech Tips
1
Aug 13, 2018 03:55 PM
883rTorres
Sportster Models
3
Aug 14, 2014 03:47 PM
bykeguy
Sportster Models
7
Mar 19, 2008 06:31 AM
Racingcodyman
Ignition/Tuner/ECM/Fuel Injection
2
Mar 22, 2007 11:31 AM




All times are GMT -5. The time now is 10:19 PM.