Pump Jet
Thread Starter
|
6th Gear
Joined: Feb 2020
Posts: 14
Likes: 0
From: Chipping Norton
Pump Jet
Hi all hope your all staying safe. As i have loads of time on my hands decided to clean the carb on my 1997 HD Sportster. Ok managed to knock the float bowl off the bench & across the garage. Picked it up & i have bent the accelerator pump jet. Don't think it will straighten somehow. Is this available separately or do i have to but the whole float bowl. Part number if available would be amazing. Cheers Reg.
Seasoned HDF Member
Joined: Aug 2006
Posts: 24,531
Likes: 30,855
From: Pennsylvania
Look here--->>> http://sportsterpedia.com/doku.php/techtalk:evo:carb01
And Here: https://cv-performance.com/
Part is not listed separately, looks like you have to buy the assembly.
27159-92 FLOAT CHAMBER ASSEMBLY XL1200, XL1200C, XL883, XL883C, XL883HUG, XL883
And Here: https://cv-performance.com/
Part is not listed separately, looks like you have to buy the assembly.
27159-92 FLOAT CHAMBER ASSEMBLY XL1200, XL1200C, XL883, XL883C, XL883HUG, XL883
Last edited by CoolBreeze3646; Nov 7, 2020 at 05:55 PM.
Thread
Thread Starter
Forum
Replies
Last Post
