Primary fluid level

Reply Subscribe

Thread Tools

Search this Thread

Jun 29, 2011 | 10:55 PM

Big AL 76

Thread Starter

Advanced

Joined: Apr 2011

Posts: 62

Likes: 0

From: MASS

Primary fluid level

Hi, does anyoneknow how much fluid goes into the primary for a 2005 XL1200C ?
I have a buddy who said fill it up just below the inspection plate but I want to be sure how much needs to go in. I know I know pick up a service manual, but I plan on doing that when I get my next check.. Any help would be greatly appreciated..

Jun 29, 2011 | 11:14 PM

TWIS1UP

Cruiser

Joined: Jun 2011

Posts: 164

Likes: 1

From: So. Cal.

I have a 92 and there is an overfill hole that you remove the screw and when it starts to run over it is full. I know they changed that since but I know your factory service manual tells you.

Jun 30, 2011 | 04:57 AM

cHarley

Club Member

Joined: Feb 2007

Posts: 16,320

Likes: 306

From: Boynton Beach, FloriDuh

Quote:

Originally Posted by Big AL 76

Hi, does anyoneknow how much fluid goes into the primary for a 2005 XL1200C ?
I have a buddy who said fill it up just below the inspection plate but I want to be sure how much needs to go in. I know I know pick up a service manual, but I plan on doing that when I get my next check.. Any help would be greatly appreciated..

1 quart

Jun 30, 2011 | 06:35 AM

davidearlcox

Tourer

Joined: Nov 2010

Posts: 309

Likes: 13

From: Lawrenceville, Ga.

Yes, exactly one quart. This is one fluid change that is about easy to get right. My older Ironhead required 24 or 26 ounces or something goofy in the primary. Doable, but you had to fiddle with it trying to get it just right, then what do you do with the remaining lubricant?