Audio volume control switch

Reply Subscribe

Thread Tools

Search this Thread

Mar 1, 2015 | 07:37 PM

#11

cnnesseth

Thread Starter

Cruiser

Joined: Oct 2007

Posts: 125

Likes: 0

From: Pardeeville, Wi

We're they the switch wires or different wires I found some upper wires going to light and horn switches with the black sheathing worn but wires were intact. Glad to know some had same issues. Seems like when I accelerate hard the volume will go to zero and sometimes pause the song. Has been driving me nuts for a year.

Mar 1, 2015 | 07:44 PM

#12

elindley01

6th Gear

Joined: Jul 2012

Posts: 10

Likes: 0

From: Katy, Texas

I assume they were radio control wires since repairing the breaks in the insulation completely resolved the issue. It was a very small break that I overlooked multiple times. I would try opening the controls up and manipulate the wires with the radio on to see if you can cause the radio to respond. If so, isolate and wrap each wire, put it back together, and try it then.

Mar 2, 2015 | 03:19 PM

#13

cnnesseth

Thread Starter

Cruiser

Joined: Oct 2007

Posts: 125

Likes: 0

From: Pardeeville, Wi

Quote:

Originally Posted by acchd

Yea I am not convinced it's switch either I'd take a ohm meter and test the old switch you take out.

I ohmed switch in bike and the push in function does not have connection and the up goes up to .6 ohm then down to .1. The new switch goes to .4 than down to.1 ohm. The old switch in down position read just like new switch.

Mar 2, 2015 | 05:01 PM

#14

Beak

Road Master

Joined: Apr 2008

Posts: 1,012

Likes: 285

From: Alva Florida

Quote:

Originally Posted by cnnesseth

I do not have stock radio I have a jvc with biketronics and I had a sony first and never had problem but it died and went to jvc and has been doing it since.

Call Biketronics.....they are very helpful, and probably troubleshoot it over the phone faster than all of us guessing.
http://www.biketronics.com/