95 road king

Reply Subscribe

Thread Tools

Search this Thread

Jun 3, 2015 | 11:31 AM

Ridgeway

Thread Starter

6th Gear

Joined: Apr 2015

Posts: 12

Likes: 0

From: ridgeway,va

95 road king

how do you get to the risers to a just the handlebars ?

Jun 3, 2015 | 12:38 PM

Keithhu

Seasoned HDF Member

Joined: Sep 2009

Posts: 17,138

Likes: 6,161

From: SE Michigan

Pretty sure you have to remove the headlight nacelle.

Jun 3, 2015 | 01:04 PM

mkguitar

Extreme HDF Member

Joined: Sep 2010

Posts: 14,744

Likes: 402

From: Phoenix '53, '88, '09 Big Twins

later model but this is what you are looking at- remove the handlebar clamp shroud cover

mike

Jun 3, 2015 | 01:15 PM

Keithhu

Seasoned HDF Member

Joined: Sep 2009

Posts: 17,138

Likes: 6,161

From: SE Michigan

Quote:

Originally Posted by mkguitar

later model but this is what you are looking at- remove the handlebar clamp shroud cover

Right, but to do that, dont you have to remove the nacelle?

Jun 3, 2015 | 02:12 PM

mkguitar

Extreme HDF Member

Joined: Sep 2010

Posts: 14,744

Likes: 402

From: Phoenix '53, '88, '09 Big Twins

on many models, the chrome strip is removed through the headlight hole- this reveals the front screw for the clamp cover, the rear screw is under the fork lock plate.

this is general- I don;t have an evo FLHR...but have an FLHR nacelle for my FXR

mike

Jun 3, 2015 | 03:11 PM

bikerlaw

Ultimate HDF Member

Joined: Jun 2007

Posts: 9,193

Likes: 494

From: Richmond, VA

MK is correct. You don't need to remove the headlight nacelle , but you have to remove the front trim ring and headlight assembly so you can get to the chrome spear front nut that holds on the clamp cover. Its an absurdly stupid design. Its takes a while, for sure. Later Road Kings have a reveal cover that snaps off and makes this a 30 second job.