When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I hope that link works. Its Rolinger LED's on amazon.
I'm not sure of the durability of cooling fan on the fuel moto lights. I kinda like the flexable heat sink idea.
If you want more light for night, try adding the engine guard mounted fog lights. They are awesome! I have them and love them. I run them 24/7 Great light at night and no one can ever say they didn't see you in the day.
I'll go onto detail in a couple of days- after I try a few things. I have emailed FM asking for tips.
i just tried some FM LEDS- they have GOBs of light
BUT ( and a big but) the light is not well focused and is a big blob out in front of you.
Gone is the horizontal spread to the shoulder and the sharp horizontal cut off which allows you to get light down the road without blinding on-coming traffic.
The HD dual halogen has very good optics in the reflectors and lensing to direct the light- for that to work the light source need to be it the correct place.
My first impression is that gobs of misdirected light from the LEDS is not an improvement over controlled light from the DOT halogen bulbs-
I have emailed FM to ask if they have any tips for better results.
I have seen stuff online from car guys about trying to use spacer to move the led fore/aft to get a focused light.
right now all I can do with the stock adjusters is move the blob up and down...if I move the blob out of the eyes of other drivers...then the light is too close to me.
I'll go onto detail in a couple of days- after I try a few things. I have emailed FM asking for tips.
i just tried some FM LEDS- they have GOBs of light
BUT ( and a big but) the light is not well focused and is a big blob out in front of you.
Gone is the horizontal spread to the shoulder and the sharp horizontal cut off which allows you to get light down the road without blinding on-coming traffic.
The HD dual halogen has very good optics in the reflectors and lensing to direct the light- for that to work the light source need to be it the correct place.
My first impression is that gobs of misdirected light from the LEDS is not an improvement over controlled light from the DOT halogen bulbs-
I have emailed FM to ask if they have any tips for better results.
I have seen stuff online from car guys about trying to use spacer to move the led fore/aft to get a focused light.
right now all I can do with the stock adjusters is move the blob up and down...if I move the blob out of the eyes of other drivers...then the light is too close to me.
Mike
Damn Damn Damn Damn Damn!!!#
I was afraid you were gonna say that. I had the exact same issue and even did a whole write up on that. I was hoping they got that sorted out. I inderstand this is only an issue with the single bulb headlight buckets, like my '13 and not the newer dual H9 H11 setups. My review reads exactly like what you just posted.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.