Took Out Passenger pegs... Now uglly holes.
Thread Starter
|
Stage III
Joined: Apr 2016
Posts: 3
Likes: 0
From: Tucson
Took Out Passenger pegs... Now uglly holes.
I just bought a 2016 street glide special... same day as I bought it I ordered a Le Perra solo ultra low, and took off the two up.
So today I takeoff the passenger pegs, and there are four ugly bolt holes on both side, where the pegs use to be.
Does anyone know of a plate or accessories to cover them up? or have other ideas to make it look better.
Thanks everyone
So today I takeoff the passenger pegs, and there are four ugly bolt holes on both side, where the pegs use to be.
Does anyone know of a plate or accessories to cover them up? or have other ideas to make it look better.
Thanks everyone
Extreme HDF Member
Joined: Sep 2010
Posts: 14,744
Likes: 402
From: Phoenix '53, '88, '09 Big Twins
there are black plastic plugs that'll fill those holes- check the hardware section at ace hardware.
you can also get chrome plugs
suggest you get a little black paint on a qtip and paint the threads where you removed the bolts- exposed steel will rust and stain the black paint
mike
you can also get chrome plugs
suggest you get a little black paint on a qtip and paint the threads where you removed the bolts- exposed steel will rust and stain the black paint
mike
Extreme HDF Member
Joined: Sep 2010
Posts: 14,744
Likes: 402
From: Phoenix '53, '88, '09 Big Twins
well- any "cover" made for that area is going to look like a "cut off piece of pie plate"* and draw the eye to it.
Mike
* my generic term for about everything sold in the krapkin catalog
Mike
* my generic term for about everything sold in the krapkin catalog
Seasoned HDF Member
Joined: Jan 2011
Posts: 28,842
Likes: 16,580
From: Wisconsin, USA
From a previous thread:
HazyHog , 10-07-2013 07:45 PM
The Harley ones are pn#90493-83 They cost me under a buck for 2 of them. They fit right in with just a push. The poster that said they were told to hammer them in was given the wrong part number for passenger peg holes.
HazyHog , 10-07-2013 07:45 PM
The Harley ones are pn#90493-83 They cost me under a buck for 2 of them. They fit right in with just a push. The poster that said they were told to hammer them in was given the wrong part number for passenger peg holes.
That's what I did as well.
Trending Topics
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
