When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
K&P claims that their reusable filter acts as an oil cooler of sorts. Does anyone have any real world experience with how much of a drop in temperature this filter is capable of producing? I realize it won't be anywhere near as much as a traditional oil cooler but every little bit counts! Thanks in advance!
I haven't seen any data. It does add surface area to cool the oil when the bike is moving. The Cycle Solutions exclusive S-44 version is even bigger than the S-4, like 20%. I asked K&P about about that filter and they referred me back to Cycle Solutions but K&P is the manufacturer.
I have the flo-1 filter same as the K&P, the oil temp according to my gauge is around 5-10° less not really worth writing home about. The filter though imho is top notch , I like it only takes a couple minutes to clean.
K&P claims that their reusable filter acts as an oil cooler of sorts. Does anyone have any real world experience with how much of a drop in temperature this filter is capable of producing?..........
Been using the FLO PCS4C oil filter from PC Racing for a few years now. It is equivalent to the K&P. From my temp gauge I would say it has lowered temps about 5* on average. They are heavy duty and act like heat sinks.
I have K&P filters on all my bikes and would agree that the 5 degree reduction is about right. However I use them because they are superior filters, easy to clean and reusable.
.......... I would think you will notice your bike not as hot when you ride
I did notice a drop in engine temps. But the biggest temp drop in cooling was from the combination of things including: Stage 1, Oil Cooler, 165* Low Temp Thermostat, Flo Oil Filter/Cooler. Works for me.
How long do these last? and seeing them for $175 on Amazon? (holy cow) Almost a wash replacing OEM every 5k miles at $10 from local dealer (tho their prices go up every year!)
How long do these last? and seeing them for $175 on Amazon? (holy cow) Almost a wash replacing OEM every 5k miles at $10 from local dealer (tho their prices go up every year!)
I think I got mine for $129. I like the fact that they are solid billet, so you can wrench them off if they happen to get a bit stuck, unlike the disposable filters which crush easily turning a simple job into a real pain in the rear.
I would not count on any material cooling affect, I think what people are noticing is mostly natural variation in oil temp based on conditions
How long do these last? and seeing them for $175 on Amazon? (holy cow) Almost a wash replacing OEM every 5k miles at $10 from local dealer (tho their prices go up every year!)
Shopped around and picked up 2 of the FLO Billet filters for under $75 each shipped. Was worth it for me.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.