Electra glide/Street glide exhaust interchange
Thread Starter
|
1st Gear
Joined: Jun 2016
Posts: 5
Likes: 0
From: Minnesota
Electra glide/Street glide exhaust interchange
Does anybody by chance know if you can install a 2-1 Screamin' Eagle Nightstick exhaust complete with head pipes from a 2010 Street Glide onto a 2001 Electra glide standard with factory duals? My ride is a 2001 Electra Glide Standard (88ci) and my uncle has the Street Glide (96ci). He offered me a heck of a deal on the exhaust system that is if it works. So does anybody know if the complete 2-1 exhaust off a 2010 Street Glide
Club Member
Joined: Jun 2007
Posts: 45,429
Likes: 2,897
From: Bedford UK
If he is prepared to let you try to install it, then have a go. The recent 2-1-2 style won't bolt on, but a few members have managed to modify them. However that system you mention doesn't cross over, so I think it has a better chance of working. The fit at the heads is the same as your system, it will be a matter of matching up the mountings.
I have an '08 system on my 1990 Glide, so while it is not listed as fitting, it did bolt right up! It could be said that it is our duty to see if stuff intended for one model will fit others! I've been doing that for years.
I have an '08 system on my 1990 Glide, so while it is not listed as fitting, it did bolt right up! It could be said that it is our duty to see if stuff intended for one model will fit others! I've been doing that for years.
Thread Starter
|
1st Gear
Joined: Jun 2016
Posts: 5
Likes: 0
From: Minnesota
I will have to try and give it a go if he will let me. I just hate to let good parts that were barely used sit there and collect dust when your looking into buying a similar system. That and its family owned...lol I guess next time I make it down there we might have to give it a shot.
Club Member
Joined: Jun 2007
Posts: 45,429
Likes: 2,897
From: Bedford UK
I will have to try and give it a go if he will let me. I just hate to let good parts that were barely used sit there and collect dust when your looking into buying a similar system. That and its family owned...lol I guess next time I make it down there we might have to give it a shot.
Road Master
Joined: Jul 2014
Posts: 1,064
Likes: 405
From: Cedar BC
There is one of those 2 into 1 set ups for sale locally cheap,has anyone actually tried it on an older bike? From what I can find it should fit the heads but might not clear by the frame/floor board area.
Trending Topics
Cruiser
Joined: Oct 2011
Posts: 160
Likes: 5
From: indiana
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
Crazy440, Take some pictures on your smartphone of mounting points on your Bike, then visit your
Uncle and check out the mounting points on his Bike. If they are close give it a go, even if you
have to make it fit by fabricate a mounting point bracket. Nothing wrong with using take off
parts from your Uncle's Bike.
Uncle and check out the mounting points on his Bike. If they are close give it a go, even if you
have to make it fit by fabricate a mounting point bracket. Nothing wrong with using take off
parts from your Uncle's Bike.
Last edited by OldPhat; Jul 25, 2016 at 12:42 PM.
Stage I
Joined: Mar 2022
Posts: 1
Likes: 0
From: BC
2015 street glide exaust to 2007 electra glide.
I am currently in the process of building this exaust. I had to cut the cat out of it and beat the metals out of the cat. Welded back together then move 02 sensors closer to the head. This is not a true 2 into 1 but I wanted to try it. Change the mounting. Lots of work but when I am done this should open up the exaust to accommodate the intake I put on it. Will post when it's all done and let you know the results.
