RKClassic and 12" Apes - Need cable lengths
Thread Starter
|
3rd Gear
Joined: Jul 2006
Posts: 7
Likes: 0
From:
RKClassic and 12" Apes - Need cable lengths
Can anyone provide me with the correct cable lengths for the clutch, brake and throttle cables if I change my stock bars to the Wild1 Chubby 12" Apes? I want to use steel braided. Any suggestions on what cables to use or best vendor to get them from? Thanks for the help.
Ride Safe,
James
Ride Safe,
James
Road Captain
Joined: Mar 2007
Posts: 527
Likes: 0
From: Sparks, NV
RE: RKClassic and 12" Apes - Need cable lengths
Try www.johnnyvaughn.com He specializes in custom cables and you get all the parts necessary to do the conversion. He'll want to know what bike and bars and will fix you up with the correct length.
Road Captain
Joined: May 2006
Posts: 554
Likes: 0
From: Citizen of the Republic of Texas, now in GA
RE: RKClassic and 12" Apes - Need cable lengths
For WO515s I used +4 on throttle/idle and hose, +3 on the clutch, and soldered in about 7" on the wiring. If I were to do the same again, I would probably do only +3 on the hose and +2 on the clutch. Hope this helps............
Ride safe.
Ride safe.
Thread
Thread Starter
Forum
Replies
Last Post
