When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Wow, went for a short ride yesterday with lowers removed, for the first time on this bike. Wind coming from all over the place, very annoying. I think ill put them back on. Now I understand all the discussion of wind, buffeting, ect. I never knew they made such a difference.
Crazy how much they affect, isn't it? I added lowers to my Street Glide and it changed the entire ride. It's a bit warmer on my legs, but totally worth the trade off.
for the winter, i put the vent doors back on. take them off again in the spring. makes a big difference in 'felt' heat, as even with them fully open, they do block a bit. only takes a few minutes to do, and don't have to take them off the bike to do it.
I removed the vent doors because they were a pain in the @$$, but left the lowers on. all is good. You buy an Ultra for a reason, tot to take all of the xtra's off
Lowers on year round is the ultimate. Especially when riding elevation changes of 7,000+ ft with temp swings of 50 degrees.
I cut back the doors a couple inches to allow max air flow through vents. And trimmed the bottom portion of the lowers to allow more airflow to the pipes. Still lots of protection and airflow for summer temps.
Last edited by KumaRide; May 31, 2018 at 06:47 PM.
Im actually thinking about doing these on the RKS. I dig the look of lowers with no fairing, and gives a clean spot for speakers. I assumed they were a no no in the summer with an air cooled bike though. No issues with that?
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.
Lowers VS. No Lowers
