Need some advice

Reply Subscribe

Thread Tools

Search this Thread

Jul 12, 2007 | 10:11 AM

sulkaman

Thread Starter

Cruiser

Joined: Mar 2007

Posts: 122

Likes: 0

From: Chardon, Ohio

Need some advice

Two days ago when I was riding and I came to a stop the engine shut off. I attempted to restart it but it didn't click - nothing. Complete silence. After a few minutes I tried again and it fired up as usual. I then parked it at work and a few hours later when leaving work...same thing. Nothing. Not even a sound of it trying to turn over. Then a later try fired her up. As I was driving it jerked a few times as if it was going to shut off and the red engine light came on. It then settled down and I made it home. Any thoughts on what my trouble might be?

Thanks,

Frank

Jul 12, 2007 | 10:32 AM

MACK

Road Warrior

Joined: Dec 2005

Posts: 1,817

Likes: 4

From: MONTGOMERY,AL.

RE: Need some advice

check and make sure you got the download and new relay for the 03. You can do so by having your hd guy do an swr inquiry on your vin number. start there before you spend a lot of dough because those are free.

Jul 12, 2007 | 01:32 PM

sulkaman

Thread Starter

Cruiser

Joined: Mar 2007

Posts: 122

Likes: 0

From: Chardon, Ohio

RE: Need some advice

Mack, thanks for the response. I was told when I bought the bike that the Stage 1 download was performed. I will do as you say though and check.

Frank

Jul 12, 2007 | 01:44 PM

electra trike

Advanced

Joined: May 2007

Posts: 65

Likes: 0

From:

RE: Need some advice

Check your battery connections also check the connections at the starter. Pull the wire off at the starter with the pig tail and make sure there is no corrodions on the end of the wire or the pig tail is loose itself.

Jul 12, 2007 | 02:54 PM

PapaTravis

Elite HDF Member

Joined: May 2006

Posts: 4,391

Likes: 10

From:

RE: Need some advice

Agree with electra trike. Check the battery connections first. Very common for them to vibrate loose, leaving you standed.

Jul 12, 2007 | 03:00 PM

nightglide

Road Master

Joined: Dec 2006

Posts: 951

Likes: 1

RE: Need some advice

As they stated, first check the Batt.

Jul 12, 2007 | 03:07 PM

BiggestDawg

Advanced HDF Member

Joined: Jun 2005

Posts: 2,259

Likes: 41

From: Battle Ground, WA

RE: Need some advice

I had a very similar thing happen with mine. It turned out to be the ignition switch. I got a new one, after I broke the old one putting it back together after cleaning it, cost a HD but the problem went away after that.

Trending Topics

beware Harley new ESP

23

949
Intermittent Electrical Blackouts at Startup

20

459
FLHXST Stage 2 - SE 462 / Feuling 472 / SS 465 - and cam plate+oile pump,...

16

404
Fuel Moto breather

14

351
From 1999 to 2005, Harley Twin Cam TC and TCb motors had maintenance-prone...

13

404

Jul 12, 2007 | 03:56 PM

SteelCityScooter

Road Master

Joined: Sep 2006

Posts: 991

Likes: 0

From:

RE: Need some advice

Quote:

ORIGINAL: BiggestDawg

I had a very similar thing happen with mine. It turned out to be the ignition switch. I got a new one, after I broke the old one putting it back together after cleaning it, cost a HD but the problem went away after that.

That would be my guess also,or the run/kill switch.
When it does the no start thing do you get lights, gauges???
A loose battery connection would mean nothing comes on, but a bad connector in ignition switch or run/kill would let the lights work, and not the starter or ECM.

When attempting to restart you are cyling the igniton swith and the run/kill switch. Could be one of those two.