103 heads

Reply Subscribe

Thread Tools

Search this Thread

Mar 27, 2020 | 06:20 AM

brawner11

Thread Starter

Tourer

Joined: Feb 2013

Posts: 338

Likes: 5

From: Mattoon il

103 heads

So looking at picking a set of 103 heads off a wide glide from my buddy iv looked online and can’t find any information. Are the 103 heads the same for all tc motors I have a 14 SGS

Mar 27, 2020 | 06:24 AM

Notgrownup

Seasoned HDF Member

Joined: Mar 2009

Posts: 24,712

Likes: 9,216

From: Snow Hill, NC

Quote:

Originally Posted by brawner11

So looking at picking a set of 103 heads off a wide glide from my buddy iv looked online and can’t find any information. Are the 103 heads the same for all tc motors I have a 14 SGS

not 100% sure but, should be. I may be wrong but I thought the only difference between the std and HO 103 was the cams.

Mar 27, 2020 | 06:33 AM

CoolBreeze3646

Seasoned HDF Member

Joined: Aug 2006

Posts: 24,495

Likes: 30,781

From: Pennsylvania

Some 103 CU were liquid cooled I think. Do not know if there are differences between the air cooled models.

Mar 27, 2020 | 06:44 AM

Notgrownup

Seasoned HDF Member

Joined: Mar 2009

Posts: 24,712

Likes: 9,216

From: Snow Hill, NC

Quote:

Originally Posted by coolbreeze3646

Some 103 CU were liquid cooled I think. Do not know if there are differences between the air cooled models.

good point

Mar 27, 2020 | 06:46 AM

GalvTexGuy

Seasoned HDF Member

Joined: Apr 2015

Posts: 10,058

Likes: 5,316

You can check out the part numbers on Ronnie's Parts Finder.

Mar 30, 2020 | 07:00 PM

ratpick

Road Captain

Joined: Jun 2012

Posts: 574

Likes: 156

From: Big Sky Country

Maybe make sure the front head is set up to accept front motor mount for your touring bike--not sure if they were all drilled/tapped for that...?

Mar 30, 2020 | 07:16 PM

Campy Roadie

Seasoned HDF Member

Joined: Aug 2011

Posts: 11,814

Likes: 5,120

From: SW Ohio

Quote:

Originally Posted by ratpick

Maybe make sure the front head is set up to accept front motor mount for your touring bike--not sure if they were all drilled/tapped for that...?

This guy knows what he's taking about ^. Dyna/Softail heads are not drilled and tapped for the Touring stabilizer mount on the front head. They can be machined, Kirby at V Twin Racing has done it for me.