When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I've tried 2 different height stock windshields on my RKC and 2 different fairing mounted windshields on the same bike. If there's a difference in handling, I can't tell.
You should be looking OVER the windshield (you probably know that) with the windshield at aprox nose or moustache/mouth area-height/. A little wind in your face is normal.
Most are slightly adjustable. Either bracketry or tilt angle. They're all a little different. Even raising or lowering your seat or suspension changes this geometry.
If the stock shield seems a smidge short, you might look into a replacement stock shield with a recurve. That usually pushes the wind up another 1 1/2". I think the stock is 19 1/2", at least it is on my '13 King. I could feel a slight wind buffet above my head with the stock shield. With a stock height and recurve, it's pretty smooth now.
Clearview Shields makes a 21" and 24" with and without the recurve if you want to go taller. You can check it out here.
I had to cut mine down....I am not blessed with height like you, but I bet if I was, I could've very carefully drilled new holes and increased the height just a little bit.
Then again, you can always buy a new (taller) shield like others will tell you.
Originally Posted by tdeffler
Oh, I'm looking over it. The windshield comes up to my Adam's apple.
I've been using Clearview for the past 10 years , top notch . You can order them any way you want , standard or wide , tinted , curved etc . I have the light tinted grey , 2 years old and still looks new . They come a little thicker than stock as well , so that's a plus . No , I don't work for them !
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.