Code Help
Thread Starter
|
Cruiser
Joined: Mar 2005
Posts: 230
Likes: 63
You are the 1st person to say crank sensor. No one I have talked to and nothing I have seen while researching this has mentioned that.
Last edited by Angryman; Jul 18, 2022 at 09:40 AM.
Thread Starter
|
Cruiser
Joined: Mar 2005
Posts: 230
Likes: 63
Well, I got the intake seals and exhaust gaskets done. Also changed out the fuel filter for good measure. Cleared the codes, checked for leaks at intake and went for a 50 mile ride. Bike ran good with no stumbles, breaking up or backfires. Seemed to run a little hot. Leg felt hotter then usual. Not sure if it actually was or that it was just hot as ***** out. When I got home I checked the codes and leaks again. No leaks that I could detect but it had codes P0132 and
P0151. I am stumped. Might have to try the crank sensor. At this point what could it hurt.
P0151. I am stumped. Might have to try the crank sensor. At this point what could it hurt.
Thread
Thread Starter
Forum
Replies
Last Post
Harpo568
Welcome Area Only
31
Apr 19, 2017 09:26 PM
Black_Hog
General Harley Davidson Chat
21
Apr 5, 2014 07:11 AM
