New bars installed.
Thread Starter
|
Seasoned HDF Member
Joined: May 2006
Posts: 6,500
Likes: 332
From: Blue Grass (KY)
New bars installed.
Finished the 12 Mayhem bars today, pulling the wires was a pain in the butt
started bike, all except the engine light and security light stayed on. Everything worked as it should, horn, lights, ran fine, cruise control worked fine. Got home, turned off, restarted and no engine light but security light (red) stayed on, turn of and security light blinks as it should
restarted and red light steady still
Ok, Im lost key fob? Bike started right up
Ok, Im lost key fob? Bike started right up
Thread Starter
|
Seasoned HDF Member
Joined: May 2006
Posts: 6,500
Likes: 332
From: Blue Grass (KY)
no, no codes, just the red light staying on..
Seasoned HDF Member
Joined: Dec 2009
Posts: 17,684
Likes: 6,061
From: Niagara, Ontario, Canada
I just threw out a couple basics, maybe a short inside with the wiring? Surprised no code showed up. Could be a simple weak battery in the fob, others will chime in I'm sure.
Seasoned HDF Member
Joined: May 2018
Posts: 5,814
Likes: 7,142
From: Las Vegas
Check the clutch and front brake lever switches for proper operation. If you didn't get them properly aligned when you put the hand controls back together this can cause the issue you're having.
Trending Topics
Cruiser
Joined: Oct 2009
Posts: 216
Likes: 172
From: Edgewater, FL.
You may have replied too quickly about no codes. There is a procedure to check for codes that you can google. I changed to LED's and got the same security light. Found a code that was related to the lights as it thought I had one burn't out since the load was lower. Added the LED resister and cleared code. No security light.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Southpaw Super Glide: A Left-Hand-Drive 1979 Harley FXE Built to Fit the Rider
Verdad Gallardo
The Best and Worst Harley-Davidson Moves of 2025
Verdad Gallardo
Thread Starter
|
Seasoned HDF Member
Joined: May 2006
Posts: 6,500
Likes: 332
From: Blue Grass (KY)
You may have replied too quickly about no codes. There is a procedure to check for codes that you can google. I changed to LED's and got the same security light. Found a code that was related to the lights as it thought I had one burn't out since the load was lower. Added the LED resister and cleared code. No security light.
the run/stop switch works as it should, guess Ill have to swing by HD shop and have them check it out.
thanks all
Thread
Thread Starter
Forum
Replies
Last Post
David Hardie
Electrical/Lighting/Alarm
3
Jan 22, 2019 03:39 PM