Is this normal?
Thread Starter
|
6th Gear
Joined: Jun 2019
Posts: 11
Likes: 1
From: Sammamish, WA
Thanks, Rounders.. When I say warmed up, I mean the gauge shows zero at idle after I've been riding for about 30 minutes in 75 degree weather on a typical ride. The oil gauge is not reading high... when engine is cold AND when I'm riding on the interstate, oil gauge is at about 28/almost pointing straight up.
Seasoned HDF Member
Joined: Mar 2021
Posts: 18,475
Likes: 3,723
From: backwoods
If the bike is doing something different I would want to know why it changed
That year I believe should not be near zero unless in stupid traffic. Later years,do seem to run lower.
I also expect in 40s at highway speed.
You could install test gauge. But if it goes in same spot, might be tough with engine hot so close to exhaust. I am not sure if some place else to install but I would think about taking for ride coming home and testing.
If it has changed I would want to know why.
Not sure if to late when idiot light comes on
If doesn't sound different, that is good sign. But I would still want to know.
I am assuming they change pumps with 96". But I am guessing
Maybe bad gauge, pump, bas pressure relief. No clue really.
Is the twin cams tick any different? Again assuming loud on your year too.
That year I believe should not be near zero unless in stupid traffic. Later years,do seem to run lower.
I also expect in 40s at highway speed.
You could install test gauge. But if it goes in same spot, might be tough with engine hot so close to exhaust. I am not sure if some place else to install but I would think about taking for ride coming home and testing.
If it has changed I would want to know why.
Not sure if to late when idiot light comes on
If doesn't sound different, that is good sign. But I would still want to know.
I am assuming they change pumps with 96". But I am guessing
Maybe bad gauge, pump, bas pressure relief. No clue really.
Is the twin cams tick any different? Again assuming loud on your year too.
Last edited by Rounders; Aug 11, 2023 at 05:28 PM.
Seasoned HDF Member
Joined: Mar 2021
Posts: 18,475
Likes: 3,723
From: backwoods
I have never had one go bad. Any value in taking off and cleaning fitting?
I am guessing you'll have to hook up gauge
My after market one screws into alarm gauge. Never looked closely at factory gauge. Is it one unit or does gauge screw into alarm? Is it even same spot?
Probably just gauge, but I would want to know why it changed
I am guessing you'll have to hook up gauge
My after market one screws into alarm gauge. Never looked closely at factory gauge. Is it one unit or does gauge screw into alarm? Is it even same spot?
Probably just gauge, but I would want to know why it changed
Seasoned HDF Member
Joined: Mar 2021
Posts: 18,475
Likes: 3,723
From: backwoods
Seasoned HDF Member
Joined: Mar 2021
Posts: 18,475
Likes: 3,723
From: backwoods
Ya it's damn near 20 years old, why not
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
Thread Starter
|
6th Gear
Joined: Jun 2019
Posts: 11
Likes: 1
From: Sammamish, WA
Hahahahahaha! Nice. Ignorance is bliss... as long as the lifters stay quiet.
