SERT or Power Comander?
Thread Starter
|
Advanced
Joined: Jul 2007
Posts: 63
Likes: 0
From:
SERT or Power Comander?
I have an 03 RG with a SERT and an 05 Rg with a PC.
The 05 RG
Edelbrock 95inch EFI Performer kit
Edelbrock intake
Rineharts
Billet AC
Gear Drive
Would the 05 RG benefit more from the SERT or should I just leave the PC the way it is. The PC was dyno tuned at Sturgis last year to 98hp.
The 05 RG
Edelbrock 95inch EFI Performer kit
Edelbrock intake
Rineharts
Billet AC
Gear Drive
Would the 05 RG benefit more from the SERT or should I just leave the PC the way it is. The PC was dyno tuned at Sturgis last year to 98hp.
Seasoned HDF Member
Joined: Oct 2006
Posts: 5,977
Likes: 85
From: Nevada
RE: SERT or Power Comander?
Donnie Peterson in AIM made an interesting statement in this month's issue.
Apparantly he has used PC's for some time. His new bike has a SERT. At this point
he likes the PC better.
Apparantly he has used PC's for some time. His new bike has a SERT. At this point
he likes the PC better.
Road Master
Joined: Jul 2007
Posts: 792
Likes: 0
From: Niagara Falls, NY
RE: SERT or Power Comander?
If you are staying with your current setup at 95" then the PC is fine, once you go bigger like 110"+ then you need to either get a stageII download or get a SERT. Reason is timing needs to be taken away more than the PC can allow.
I have to agree if it isn't broken don't worry PC is fine. BTW I do run SERT but I have an '07. with o2s.
I have to agree if it isn't broken don't worry PC is fine. BTW I do run SERT but I have an '07. with o2s.
Thread
Thread Starter
Forum
Replies
Last Post
bignew
Ignition/Tuner/ECM/Fuel Injection
4
Jul 14, 2011 06:13 AM
