When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
mine squealed real bad at 1k service had them check it as well. said they couldnt find anything wrong but no squeal since then and have about 3k now on 08 SG
I have 5000 miles on mine and they haven't squealed yet, but they are really dusty. On my '07 Heritage they squealed bad until I installed Lyndall pads, no more squeal or dust. I may install Lyndall pads on the '08 just because of the dust.
Mine does too but I still only have about 50 miles on the bike. I just figured it was because they were new and the dealer didn't prep the disc'sright. I just picked my bike up 4 days ago but have not had the chance to ride much due to work. I will check the keeper pin to see if it was lubed or not.
Hmm, I didn't know the dealer was supposed to "prep" brake discs. How do they do that?
Mine make that noise every once in a while, 1000 miles on it now and my wife notices it. I am half deaf anyways. Just turn up the radio!! But seriously it has gotten better.
Aye, "The Old Man", you don't hear the brakes or you don't hear your wife?
Hmm, I didn't know the dealer was supposed to "prep" brake discs. How do they do that?
My dealer said they do it, just to make sure there's no problem with them. He said "We wipe them down with alchohol to get, if any, oil off the rotors from assembly and ride them to score them in. Don't want the customer to leave and they don't have brake."
You may give this a try [HERE]. The photos in this fix are off of a 00-07 2X Cam calipers but you get the idea, you will have to improvise some.
[ul][*]You can also give me a call if you are in the middle of the job and need help: 1-866-899-5962 toll free, No problems in helping![*]Substitute the new pads in the article to your old pads for installation. This has been known to help.[*]Sorry, but you may have a problem with the friction material Harley uses.
[/ul]For excessive dust;
[ol][*]there is nothing you can do with it except clean off that corrosive brake dust (from the wearing of sinister brake pad material) every time you go out.[*]Corrosive brake dust will rust your wheels, cake up around your caliper pistons (which does not allow your pistons to retract evenly & causes one part of the pad to rub thus make noise or heat the rotor) and rust up other parts ie; frame, forks, et. al. Think of it a salt water rain which needs to be cleaned off thoroughly & polished![*]I am sorry but the only real cure for all of these ills are purchasing Lyndall Racing Brake Pads. You may do a search for other memberâs cures and it will lead you back to this solution.[/ol]
No squeal, but was getting a noise at full stop. Did my 5K and saw that I had only 1/16 inch of pad left. Now I occassionally have a bad habit of draging the rear brake, but 5k on a set of pads is kinda low. Was worried about the replacement with ABS - but read my shop manual - yeah the one it took 6 months to get - and it was really no different than any other caliper and pads - just disconecting a wire going to the ABS sensor
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.