Would someone be cool enough to look up a few part numbers for me. I built the Cruise Control harness for a 2000-2001 FLHT and I had all the part numbers except for one plug. SinceI had to order that plugnumerous timesbefore I got the right one I have no idea which ticket / part number is correct.

I'm trying to document this for public domain, and for a couple of buddies and that is all I lack.

It's the 12 position Deutsch connector, secondary Lock, Crimp Terminals for the Fairing end of the Ultra Overlay Harness. It plugs into the expansion plug under the fairing.

Should also be the same exact plug on the end of the handle bar control harness.

Part Numbers I think that are correct are:
1 of 72119-94BLK
Deutsch 12 position Connector

1 of 72159-94
Secondary Lock

4 of 72195-94
Seal Pin

8 of 72191-94
Crimp Terminals

Thanks a mil...
Rev

 

Rev, in the absence of a reply to your thread, shoot Dawg or TwinCam47 a PM with what you need.

 

I'm trying to do this now, can you give me the info?

 

You can try this link. Pick the parts and go to check-out (you don't buy anything) to get the HD part nos.

http://www.shopronniesharleydavidson...idsonparts.htm

Carl

 

anyone have the part # for 2003 Fltr silver and black anny. front fender

 

best bet is the dealer ..... I picked up a '03 Hertiage softail Classic this evening.. the leather studded bags are trashed and it too; is needing a front fender.

If you go thru the dealer... the fender will have to be special ordered. silver/black top secret paint scheme.. But a good paint job should be able to come close to matching the original paint on the Ani bike.. I hope !

 

If you want to shoot me a PM I can get that for you when I get to the shop tomorrow. Can only get 2008-Later from the house.

 

if you decide to paint your fender,ask a local paint store to look up the paint code for an 03 ford truck,harley edition.it is the same as the 03 bike color.