I have a 2008 SG and am going to put the 103 stage 2 kit on...in a week or so. That is the kit with the cams, cylinders pistons, ect.... any suggestions at all?

I was thinking of going with different Cams (gear driven) than what comes in the kit. if so what ones?

Any other suggestions with the kit?

I already have the big air kit and pipes.

 

You doing the heads? Have you considered the 107" kit from Headquarters?

 

No.. stock heads... all i have to do is pay for the kit... labor is taken care of.. well most of it..

 

The Heads have to come off anyways so think about some cleaned up heads or SE Performance Heads

 

Race Tuner is always a good idea.

 

Like Ice said, you have them off anyways. Also, all of the real performance is in the heads, and for the performance you get, its not a bad value. But if you do the heads use someone reputable, there are a lot of people who claim to make tons of power, and don't know the first thing about it.

 

I paid my HD dealer to do the 103 last month with the SE tuner, SE 25 cams, BUB 7 &true duals, SE a/c, and stock 96" heads.
It made a new bike out of it without the head work. And my fuel mileage slightly improved with significantly more motor performance. From 38-40 MPG to 40-42 MPG. You'll be happy. Be sure to get 3 hr of dyno time to set up the tuner properly.

 

personally, id definately have the heads massaged..yes its an extra cost now ($400+) but your in there now and wont have the "wish I would have" blues

 

I forgot to mention.. i still have the factory warrantee..lol i kinda want to keep it. so i was thinking i could just go with some better cams? i dont think the cams that come in the kit are gear driven,, i think they are just like the stocks,, just higher lift??

 

Check out the hq-tc500-hc claim 5.5 hp and 7 tq over SE255. Also HD hasn't improved their head since BC so agree with others to look here also.