Engine Light
Engine Light
Maybe this was asked before, I couldn't find it so I will risk being called names and ask again..The red ENGINE light came on in the middle of my ride today..Anything I can do to find out what caused this?
Road Captain
Joined: Aug 2008
Posts: 559
Likes: 0
From: Berwick, Pa.
press and hold odometer rest button
turn ignition sw. to ignition (make sure kill switch is in run position)
"diag" appears in odometer window
press and release reset switch
PSStb appears
P should be flashing
press reset switch for more than 5 seconds
code is displayed (or none if no codes present)
press and release switch again to see if more codes are present.
if no more codes present "end" will appear
to clear DST's press an hold reset for more than 5 seconds
to exit without clearing, press and release the reset switch, turn off ignition
once you have the code, post it back up here, anyone with an electrical manual can look it up.
__________________
turn ignition sw. to ignition (make sure kill switch is in run position)
"diag" appears in odometer window
press and release reset switch
PSStb appears
P should be flashing
press reset switch for more than 5 seconds
code is displayed (or none if no codes present)
press and release switch again to see if more codes are present.
if no more codes present "end" will appear
to clear DST's press an hold reset for more than 5 seconds
to exit without clearing, press and release the reset switch, turn off ignition
once you have the code, post it back up here, anyone with an electrical manual can look it up.
__________________
Ultimate HDF Member
Joined: Apr 2008
Posts: 5,356
Likes: 8
From: Roswell, NM
I had the same thing up here in Sturgis, they checked for two days and finally tracked it to a broken wire in the wiring bundle on the frame between gas tank and fairing. Mighr want to check there.
Thread
Thread Starter
Forum
Replies
Last Post
hotrod1340
Electrical/Lighting/Alarm
5
Nov 11, 2016 07:42 PM
reddog06
Ignition/Tuner/ECM/Fuel Injection
11
Jul 25, 2006 03:07 PM
