Installing Boogey Lights
Thread Starter
|
5th Gear
Joined: Sep 2009
Posts: 9
Likes: 0
Installing Boogey Lights
Greetings,
I am going to attempt to install the Ultimate Engine Kit from Boogey lights tomorrow. I have the seat off, the ECM is out of the way so I can get at the battery but how do I run the wires from the lights to the battery area? There is a big metal plate under the seat between the engine and the battery, how can I possibly run the wires to the battery with that in the way.
My bike is an '08 Anniversary Ultra, if anyone has any suggestions, I would appreciate it.
I am going to attempt to install the Ultimate Engine Kit from Boogey lights tomorrow. I have the seat off, the ECM is out of the way so I can get at the battery but how do I run the wires from the lights to the battery area? There is a big metal plate under the seat between the engine and the battery, how can I possibly run the wires to the battery with that in the way.
My bike is an '08 Anniversary Ultra, if anyone has any suggestions, I would appreciate it.
5th Gear
Joined: Mar 2006
Posts: 9
Likes: 0
Installing Boogey Lights
I believe there's a plastic cover over the battery and we slide the wires through same hole the battery wires go through. I don't have an '08 to look at, but we have not had any problems accessing the battery on this model year. Feel free to send a couple of under the seat pictures and I'll be happy to take a closer look.
Scott Maentz
Boogey Lights
scott@boogey.com
Scott Maentz
Boogey Lights
scott@boogey.com
Last edited by smaentz; Sep 28, 2009 at 07:18 AM.
Thread
Thread Starter
Forum
Replies
Last Post
