1991 Batwing Fairing Removal
Outstanding HDF Member
Joined: Feb 2009
Posts: 2,005
Likes: 53
From: ID Ho
Pull the head light, loosen the 4 nuts inside, 2 each side, then remove the 5 across the windshield.
A ratchet wrench comes in real handy for the 4 inside the headlight opening!
A ratchet wrench comes in real handy for the 4 inside the headlight opening!
Last edited by hog-doc; Apr 14, 2010 at 03:45 PM.
Road Master
Joined: Jan 2008
Posts: 968
Likes: 11
From: Oconomowoc, Wisconsin
you also need to remove the light bar...2 bolts each side.. top ones you can loosen..lower ones need to be removed.
( the inside ones are nuts..not screws... 13mm if I recall correctly...)
( the inside ones are nuts..not screws... 13mm if I recall correctly...)
Last edited by kyote; Apr 14, 2010 at 06:07 AM.
Outstanding HDF Member
Joined: Jan 2008
Posts: 3,328
Likes: 15
From: Pacific Northwest
Like they said and then get ready for the time of your young life when you go to put it back together. You need an extra arm and six fingers on each hand. It takes a ton of patience first time around but it WILL go back together, trust me.
Outstanding HDF Member
Joined: Feb 2009
Posts: 2,005
Likes: 53
From: ID Ho
Thread
Thread Starter
Forum
Replies
Last Post
