Ape help needed
Thread Starter
|
Cruiser
Joined: Aug 2009
Posts: 221
Likes: 1
From: Kansas
Ape help needed
Well after seaching for the last hour or so I figure I will just ask. I got my carlini bars, wires and riser in today and can not for the life of me find the install thread I was looking at the other day. Can any of you help or know where to find a good thread for ape install for a Road King? Mine is a new 2010 without ABS. This will be my first time doing this and any advice, do's and donts or input would be much appreciated.
Thanks in advance guys.
Thanks in advance guys.
Tourer
Joined: Jan 2008
Posts: 394
Likes: 8
From: Hollywood
I dunno about 2010 but here's some help
https://www.hdforums.com/forum/chass...placement.html
http://www.moccsplace.com/images/harley/hbar/hbar.htm
good luck
https://www.hdforums.com/forum/chass...placement.html
http://www.moccsplace.com/images/harley/hbar/hbar.htm
good luck
Thread Starter
|
Cruiser
Joined: Aug 2009
Posts: 221
Likes: 1
From: Kansas
Thax so much. Not the one I was reading but very helpful. This time I will save the link. I ordered the manual but will take 7-10 days to get here. Thinking of taking a 2 hr drive to get one from a dealer in another city.
Intermediate
Joined: Oct 2009
Posts: 43
Likes: 0
if the wires are all internal i wouldn't wanna screw with that it's not that easy i would get someone that knows what they are doing cause i've changed my bars and got carlini bars and took it to a guy we know he was putting them on and doing a check over on the bike cause it's more work than you think. but if you do it good job
Thread
Thread Starter
Forum
Replies
Last Post
