When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Leaving tomorrow morning and in the past have gone 80 - 90 and into Rapid.
Was wondering if any east coasters have taken 80 - 29 -90 through the Souix Falls area? I was just thinking about trying a different route and avoiding Chicago all together as it always seems to slow there. Not sure how traffic and construction are on 80 west of IL.
I took 29 out of Omaha up to Sioux Falls and then west. Decent road with some tar snakes here and there. My son, who lives in Omaha, advised against "cutting the corner" and heading northwest off 29 and avoiding Sioux Fall due to small towns and poor roads. Good luck.
From where your at there just isn't a good way to avoid Chicago-best bet would be taking 80 to 355 or 294-NOT during rush hour. Either way you should get through in an hour (unless it's rush hour).
Not much for choices of getting around the traffic in Gary / Chicago area, the good news is the construction on I80-90 is pretty well done!
There is or was some bridge work on I80 over the Mississippi by the Quad Cities (IA-IL) and also there is some road work on both I29 Iowa & I90 SD which goes to 2 lane traffic.
I haven't been on I90/94 in Wisconsin, but I'll bet it would be some descent scenery.
Dr Q- Heading through the Chicago area Saturday afternoon. Would recomend 294 or 355?
355 is a pertty painless. It's a pretty new road so constuction ought to be low-lots of tolls. Dunno about 294 south of 290-but there's alway airport traffic where 90/294 cross-tolls too.
We're two hours east of Pittsburgh. My friends (not me this time) are leaving at 2:00 am tomorrow morning. One of the guys drives truck to Des Moines and he's set the timing up to get through Chicago when the traffic isn't so busy. I'm not sure what time of day that is though. Our trip in 2007 took us on Rts. 70, 80, 29 and 90.
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Slideshow: The bar-and-shield logo shows up on far more than motorcycles, some of the company's most unexpected products have nothing to do with riding.
Slideshow: From the troubled AMF years to modern misfires, these bikes earned reputations for reliability issues, questionable engineering, or disappointing performance.
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Slideshow: The Swiss custom shop has taken a Harley Softail and stretched it into something so long and low that it looks closer to a rolling sculpture than a conventional motorcycle.
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Slideshow: A standard cruiser becomes an intricate metal canvas in the hands of a Swiss custom house known for pushing Harley-Davidson platforms far beyond their factory brief.
Slideshow: Harley-Davidson's challenges aren't abstract; they show up in dropping shipments, shrinking dealer traffic, and strategic decisions that aren't yet translating into growth.