Roll Off Switch Too Sensative
Thread Starter
|
Tourer
Joined: Feb 2006
Posts: 279
Likes: 0
From: Oregon
Roll Off Switch Too Sensative
I installed braided cables on my '06 FLHX last winter when I replace the bars. The roll off switch in the new cable is very sensative and cancels the cruise to easily. Most of the time I am just resting my hand on the grip when it cancels. Anyone else have this issue and is there anything that can be done?
Road Master
Joined: Nov 2007
Posts: 771
Likes: 3
From: St. Bonifacius, MN
I agree cruse control requires more slack in the throttle. I did the same thing the first time I had replaced cables on a bike with cruse I adjusted the cables to provide the least amount of slack and the cruse kept kicking off. Once more slack was put back in it wooked great.
Outstanding HDF Member
Joined: Apr 2006
Posts: 2,395
Likes: 25
From: St George, UT
I've had to return to the dealer a couple of times after a service to get the throttle cable loosened a bit because the cruise clicked off too easily. that's probably the case with yours.
Thread Starter
|
Tourer
Joined: Feb 2006
Posts: 279
Likes: 0
From: Oregon
Awesome advise guys. Don't know why I didn't think of that. I loosened it up a bit and NOW, just have to wait until it quites raining to check it out.
Thanks again, I am sure that will solve my issue.
Thanks again, I am sure that will solve my issue.
Thread
Thread Starter
Forum
Replies
Last Post
Sharknose
Touring Models
2
Sep 23, 2011 08:18 PM
