Danny gray Big Seat backrest
Thread Starter
|
Intermediate
Joined: May 2008
Posts: 28
Likes: 0
From: Jacksonville, Fl.
well...I found the screw hole. The foam WAS covering it up. I had to push the foam down about a quarter inch but now I can see it. Put the backrest rest on but I'm a little dissapointed its such a pain to put on and take off. I was hoping for more of a quicker change out cause I don't want it on all the time. Thanks everyone for the help.
Road Master
Joined: Apr 2009
Posts: 817
Likes: 4
From: Memphis. Tn
well...I found the screw hole. The foam WAS covering it up. I had to push the foam down about a quarter inch but now I can see it. Put the backrest rest on but I'm a little dissapointed its such a pain to put on and take off. I was hoping for more of a quicker change out cause I don't want it on all the time. Thanks everyone for the help.
Outstanding HDF Member
Joined: Apr 2007
Posts: 2,272
Likes: 279
From: .
Sorry for bringing up a two year old thread, but has anyone figured out an easy way to do this? Been trying for two hours and decided to take a break till tomorrow. Got it pushed down enough to have half of the backrest hole lined up and that's it.
Dig out the foam. I sold my dg. It was a pos. DG subs out manufacturing of some of the components, and some of those components were really poor quality on mine. The backrest was the worst part. Mustang makes a much better seat.
Thread
Thread Starter
Forum
Replies
Last Post
rob0225
Touring Models
7
Apr 20, 2014 09:47 AM
