Need electrical help
Thread Starter
|
Cruiser
Joined: Feb 2012
Posts: 125
Likes: 0
From: Oklahoma City, Ok
Need electrical help
Got an 06 SG and put lower fairings on it from a 98 Ultra. They fit great but the front signal lights hit and I lose too much steering. Been thinking of how to correct this and the only thing I came up with are the chrome signal lights that are just like the OEM style. These don't have the big bullet looking "buckets". The LEDs are machined in the front edge of the bracket. Don't have 180 bucks yet or any other ideas but the stock ones half to go ASAP. If I unplug the stock ones and didnt replace them with anything, will my rear signals work. Will I throw any codes or mess something up.
Extreme HDF Member
Joined: Sep 2010
Posts: 14,744
Likes: 402
From: Phoenix '53, '88, '09 Big Twins
you'll need to have something there to equalize the load--- you could unbolt the stock lights and stick them up inside the fairing ( plugged in) and that would work until you get a plan
mike
mike
Thread
Thread Starter
Forum
Replies
Last Post
03Custom883
Want To Buy Motorcycles/Parts/Accessories
0
Feb 1, 2012 06:31 AM
