2009 touring true track
Thread Starter
|
Club Member
Joined: Jun 2009
Posts: 5,323
Likes: 37
From: NJ
2009 touring true track
Does anyone have any pictures of a 2009 tt touring install?
Directions suck and photos suck worse.
If I could see this it would help.
I understand the trans pan mount.
I don't understand how to mount the large part on the other end......
Thanks in advance.
Directions suck and photos suck worse.
If I could see this it would help.
I understand the trans pan mount.
I don't understand how to mount the large part on the other end......
Thanks in advance.
Elite HDF Member
Joined: Jul 2008
Posts: 4,741
Likes: 45
From: Indian Land, SC
The install directions they have on line seem pretty clear as far as what pan bolts have to be removed, rear exhaust hanger but as far as the front their not that clear. Let us know if you notice a difference with it. Pricey little thing but if it works as advertised it may be worth it.
Road Warrior
Joined: Jun 2008
Posts: 1,344
Likes: 173
From: Watertown, CT
Just installed one on my '10 RK yesterday. Your right, the instructions are crap. The large part your refering to bolts to the cross member . Seperate and keep the bolts in the right order. The small part goes over the top or the crossmember and the large section goes under and is bolted up. On the right side the bolt is removed and the nut with the built in square washer is removed and it is placed on top of the crossmember with the round portion facing down into the hole in the member. One thing I noticed was the hole to drain the transmission wasn't big enough for a 5/8 socket to fit into to remove it so I had to file it larger. Sorry I can't explain it better as it isn't one of my strong points
Road Warrior
Joined: Dec 2008
Posts: 1,639
Likes: 2
From: Australia
I thought the instructions were ok, it kinda just fits in once you are under the bike. The 2 peices sandwich either side of the crossmember which must be too flimsy to just bolt to.
I didn't take pics of my install, but I can if you are really stuck.
I didn't take pics of my install, but I can if you are really stuck.
Cruiser
Joined: Aug 2010
Posts: 136
Likes: 1
So, how is it?
Trending Topics
Seasoned HDF Member
Joined: Oct 2006
Posts: 5,977
Likes: 85
From: Nevada
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Supporter
Joined: Apr 2012
Posts: 132
Likes: 0
From: Beaumont, TX
NEL'S I so appreciate your help.. I was just today looking at my true track to put on my 2010 ultra limited and I couldn't figure for anything what was the deal with the big piece except surely it has to be seperated and done about as you say... Thanks a bunch.. I think my V&H power headers crossover pipe shields will come awful close to the pan bracket like I may have to trim the shield some.. I do experience a slight wiggle when I am going at high speeds and crossing lanes or experiencing some lanes that are rutty or grooved.. It is kinda unnerving so I am hoping this stabilizer will quench the rear wiggle I keep feeling at high speeds
David
David
Supporter
Joined: Apr 2012
Posts: 132
Likes: 0
From: Beaumont, TX
David