Installed Cams, won't run now??
Thread Starter
|
Intermediate
Joined: Jun 2006
Posts: 49
Likes: 0
The fuel pump runs, but I am not sure its building pressure. I didn't pull any fuses. When I disconnected the fuel line it only leaked a drop or two which leads me to believe there is no pressure.
Outstanding HDF Member
Joined: Oct 2009
Posts: 2,488
Likes: 30
From: Maryland near DC
if the fuel pump starts and runs for a few seconds and turns off it is building pressure, also the fuel line when removed should only let out a couple of drops of gas...stupid question, is there gas in the bike???
Thread Starter
|
Intermediate
Joined: Jun 2006
Posts: 49
Likes: 0
So the pump does run for a few seconds, then stop. Also after each start attempt, it runs again for a few seconds. But the plugs are dry, it won't run, and again, when I put gas directly in the cylinders, it fired right up
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Yes you could do this as the injectors are the same front and rear so the connections are the same. On an '09 the front has a yellow wire with green stripe and a white wire with a yellow stripe. The rear has a yellow wire with green stripe and a green wire with a grey stripe. If the color code is different on your year model then just swap them and see what happens.