Looking to get a set of SE heads for my 07 Street Glide.
I have installed the 103 kit and now want to install heads
with CR .
Good idea or not? Also what about price to do it.
Shortleg[Dave]

 

You are better off contacting someone like tman performance and porting your stock heads. You will get a better combination.

 

where are you at? there are a number of quality shops that can modify your heads by installing bigger valves, and porting/polishing giving you a much increased velocity in fill time, which is what you want, ask around for some suggestions in your area. on the west coast, I can recommend Dave Mackie, highly recommended, has forgotten more than most people know

 

I believe the only SE heads with ACRs are the MVA heads? They not terrible but at $1400 there are lots of good head porters out there that can set them up for your motor combo and make some power.

 

Got to agree with the others. I didn't go with bigger valves but I did have my heads ported and multi-angle valve cuts with a little polish work as well as installing ACRs for 750.00. The heads run great. You get more bang for your buck from a machine shop that knows what they are doing over buying the SE heads.