FL-VIED settings?
Novice
Joined: Oct 2011
Posts: 23
Likes: 0
From: Nashville, TN
i have mine set at 75%, gutted and everything else is stock, the plugs are a light chocolate color and the bike runs a butt load cooler than stock. i was ready to trade in a 3 month old bike until this mod.
Road Master
Joined: Feb 2008
Posts: 770
Likes: 4
From: Western, KY
My set up is very close to what you run. Ive tried screwing around with mine and honestly didnt notice much difference. So I just set them up like the instructions recommended and left them there. So far so good!
Cruiser
Joined: Sep 2008
Posts: 233
Likes: 0
From: NB, Canada
I have the exact set up as the OP. I Set my Vieds at 50% when I first installed them, everything seemed OK. Tried 75% just to see if made a diff or not. At 75% I could smell fuel and my bike didnt run as well. I have them dialed back to 40% and all is good. Some have them set at 25% because of Reversion. To be honest I cant see or feel any diff between 40 and 50%. Oil Temp is around 240 on a hot day, fuel mpg is in the mid to upper 40s all day every day. Im happy with Vieds
Thread
Thread Starter
Forum
Replies
Last Post
