2014 limited brake pedal angle
Don't think you'll regret it.
Steve
5th Gear
Joined: Aug 2013
Posts: 9
Likes: 0
From: Central Coast, CA
Thanks, same problem here
Seasoned HDF Member
Joined: Jul 2007
Posts: 6,336
Likes: 67
From: SW Minnesota
The first mod I made to my '06 was the EZ Brake pedal. It moves the pad of the pedal forward and down, giving you more room on the floor board, and allowing you to leave your heel on the floorboard while modulating the brake pedal pressure.
http://www.heelguard.com/ez_products.asp
http://www.heelguard.com/ez_products.asp
Intermediate
Joined: Jan 2014
Posts: 35
Likes: 0
From: Virginia
I went ahead and ordered a new brake pedal for my '14 Limited. It took about a day to get used to it and it is a BIG improvement. I ordered the SB014 (p). I am not using any spacers or extended floorboards. If you order online, they ask what kind of bike you will be installing it on so they can compare fitment compatibility for you. Very, very pleased with the build of the pedal and the only tricky part on installation was getting a new cotter pin in place. It was a good decision.
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Times Harley-Davidson Chucked Tradition Out the Window
Verdad Gallardo
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
Road Captain
Joined: Apr 2009
Posts: 690
Likes: 24
From: Canada, baby!
I went ahead and ordered a new brake pedal for my '14 Limited. It took about a day to get used to it and it is a BIG improvement. I ordered the SB014 (p). I am not using any spacers or extended floorboards. If you order online, they ask what kind of bike you will be installing it on so they can compare fitment compatibility for you. Very, very pleased with the build of the pedal and the only tricky part on installation was getting a new cotter pin in place. It was a good decision.
Their website says +1 won't work with lowers? I want to order the +1 for my street glide with lowers.
Can you post a couple pics, please?
Intermediate
Joined: Jan 2014
Posts: 35
Likes: 0
From: Virginia
I'll try to post some pics later but I believe there is a previous post on this thread where somebody put up 4 pics with before/after. Definitely can't go with a +1 or +2 with lowers. IMO you wouldn't want that anyway unless you are wearing huge boot size. The SB014 (p) I installed allows me access to the entire floorboard without hitting the pedal. Transitioning my right foot from foot peg to rear brake is much easier and quicker now too. I can see why they said the +1 and +2 won't work with lowers though. It's because there just isn't anymore clearance for the pedal to come down without hitting the inside. On mine, I have only about a half inch of clearance left. Hope that helps.