Need your help please
Thread Starter
|
Cruiser
Joined: May 2011
Posts: 128
Likes: 0
From: OK
Need your help please
I have a 2011 Street Glide with a 96 cui engine, last year I had the big bore kit installed to make it a 103cui along with oil cooler, heavy clutch, ACR and Andrews 26H cam. To get a little more power out of it my dealer is suggesting the following. What is your experience with what he is suggesting and is the pricing out of line? A total of $2,700.00 after a 15% discount. Thanks!!
Ultimate HDF Member
Joined: Mar 2012
Posts: 6,129
Likes: 143
From: Santa Cruz
That is a lot of money for basically headwork but should help if your only option is SE parts? I think ya messed up on the 26 cams in 103 because they don't have the lift needed when doing the heads which is the reason they are recommending high ratio rockers. There shouldn't be any labor to install the intake as they have to do it anyway to replace heads. If ya go that way at least do thinner head gaskets. I would send your heads out for proper porting to match a bigger cam rather than buying SE heads and rockers. Same with the intake if ya really are going for big power. And there is always the crank scissoring issue with big power...
Extreme HDF Member
Joined: Nov 2007
Posts: 14,670
Likes: 139
From: East of the Sun, West of the Moon
I agree with oldhippie on all of it.
so I wonder if they're charging 113 labor for the intake which they have off to begin with or is it for the installation of the high flow injectors which takes about 1 min per injector? LOL
so you've got;
567.37 in labor
378.25 in tune
1592.03 in parts
Man I wouldn't fool with this. I'd call Kirby @ Vee-Twin racing get your heads done. then find an indy to put this together for you if you're not capable and then have it tuned. You'll come out a lot cheaper for the same end result IMO.
so I wonder if they're charging 113 labor for the intake which they have off to begin with or is it for the installation of the high flow injectors which takes about 1 min per injector? LOL
so you've got;
567.37 in labor
378.25 in tune
1592.03 in parts
Man I wouldn't fool with this. I'd call Kirby @ Vee-Twin racing get your heads done. then find an indy to put this together for you if you're not capable and then have it tuned. You'll come out a lot cheaper for the same end result IMO.
Thread Starter
|
Cruiser
Joined: May 2011
Posts: 128
Likes: 0
From: OK
Here is the dyno sheet after I had the work done at Route 66 Harley. Probably spent too much but it was the easiest and quickest way to get it done. I am happy with the way it runs, pulls very hard!!
Thanks for taking the time to give your advice even though I didn't listen!!
Really, Thank You!!
Thanks for taking the time to give your advice even though I didn't listen!!
Really, Thank You!!
Seasoned HDF Member
Joined: Jan 2013
Posts: 10,637
Likes: 1,246
From: Lake, Ms
JMO but I'm not buying those numbers with that setup. As long as your happy with it tho is all that matters....I guess.
2010 Limited with some stuff
2010 Limited with some stuff
Trending Topics
Extreme HDF Member
Joined: Nov 2007
Posts: 14,670
Likes: 139
From: East of the Sun, West of the Moon
Here is the dyno sheet after I had the work done at Route 66 Harley. Probably spent too much but it was the easiest and quickest way to get it done. I am happy with the way it runs, pulls very hard!!
Thanks for taking the time to give your advice even though I didn't listen!!
Really, Thank You!!
Thanks for taking the time to give your advice even though I didn't listen!!
Really, Thank You!!
HD Forum Stories
The Best of Harley-Davidson for Lifelong Riders
7 Surprising Harley-Davidson Products that Are Not Motorcycles
Verdad Gallardo
8 Best Harley-Davidson Motorcycles Ever
Pouria Savadkouei
10 Worst Harley-Davidson Motorcycles Ever
Pouria Savadkouei
Killer Custom's Jail Break Is The Breakout That Refused to Blend In
Verdad Gallardo
Crazy Bunderbike Build Looks Amazing, But Is It Impossible to Ride?
Verdad Gallardo
Harley-Davidson Reveals Super Cool Cafe Racer Concept
Verdad Gallardo
Engraved Rebellion: Inside Bundnerbike's Glam Rock II
Verdad Gallardo
10 Motorcycles You Should Never Buy
Joe Kucinski
10 Things Harley-Davidson Needs to Fix in 2026
Verdad Gallardo
Thread Starter
|
Cruiser
Joined: May 2011
Posts: 128
Likes: 0
From: OK
Let me help you. That's ABSOLUTELY all that matters.
And I'm not selling those numbers, I paid for them!!!!
Seasoned HDF Member
Joined: Jan 2013
Posts: 10,637
Likes: 1,246
From: Lake, Ms
2010 Limited with some stuff
Thread
Thread Starter
Forum
Replies
Last Post
